Description
Primarily designed to be connected directly to MaxxECU Race and Pro ECU’s, but obviously work with other systems as well.
Description
- 1.8 meter length
- 4.7 mm diameter
- Stainless 1/8NPT compression fitting
- Mini K type connector
- -100 to 1300 degrees Celsius (-148 to 2375 F)
- Open tip sensor tip. Faster responding then closed tip
Not Recommended for use on Rotary engines.
For tapered thread compression fitting to the stainless steel bung: about 2.5 turns to finger tight, then 3/4 of a wrench turn.
For tapered thread compression fitting to the mild steel bung: about 3.25 turn to finger tight, then 1 wrench turn.
What is important is that the threads do not leak. If the fitting is overtightened with a wrench the fitting will be impossible to remove. It is important that the fitting is not overtightened.
This item is non stocked so may take 2 weeks to come from MaxxECU
