Link ECU 1.15 Bar – Map Sensor

Link ECU 1.15 Bar – Map Sensor

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure.
This means it is best suited for use with naturally aspirated engines.
This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are expected (eg. Ram-air effect).
The wiring pinout for this sensor is marked directly on the housing.

Whats included:

1.15 bar Map Sensor
3-pin Deutsch DTM connector with stamped pins

Technical Specs:

Easy to mount via 2 5mm bolt holes. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to.
Compact aluminum enclosure
Mechanical connection via 4mm (3/16″) hose connector nipple.
Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Link 1.15 Bar’

Pinout Information:

1 = Sensor Ground
2 = 0-5v out
3 = 5v Supply