Link ECU – B Loom Medium (2LB)

Link ECU – B Loom Medium (2LB)

2.5m long ‘B’ loom to suit G4, G4+ and G4X Wire-In ECUs

Perfect for Stand alone or piggy back installations using Link Wire-In ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other.
All wires are colour coded to match the manual. This loom is also available in 0.4m and 5m lengths.

The Link looms use 0.75mm2 wire for the 1 red wires (pin B5) and the 2 black power grounds (B25,B34). All other wires are 0.5mm2.

Suitable for: 

– Link G4X Storm (Loom A also required)
– Link G4X and G4+ Fury (Loom A also required)
– Link G4X, G4+ and G4 Xtreme (Loom A also required)
– Link G4+ Thunder (Note: Loom A and connector kits C and D may also be required)
– Link G4+ Storm Black (Loom A also required) – Note: Loom B is not required for the older Silver or Blue G4 or G4+ Storm models
– Vipec V88 (Loom A also required)
– Vipec i88 (Loom A also required)

Note:

If you are planning on us to install your ECU, Please buy the Plug and Terminal kit as we will make your custom loom from Tefzel wire.