MSEL 2 – 10 position rotary switch

Producing a stepped output voltage for each position change.
Connects to any aftermarket ECU or data logger using a 5V analogue voltage input.
Useful for adjusting traction control slip targets, launch control maps, DBW throttle maps and other variable parameters on the fly without a laptop.

As standard the dial has 10 positions.
An additional limiting pin is supplied to reduce the number of positions if required.

What’s Included:

– MSEL rotary switch (straight or 90 degree boot as selected)
– Position limiting pin
– 2x 30mm adhesive decals (0–9 and ±4)

Pinout:

– Red: 5–8V Supply
– Blue: Output Signal
– Black: Ground (0V)

Specifications:

– Positions: 2–10 (adjustable via limiting pin)
– Supply voltage: 5–8V DC
– Output voltage: 10–90% of Vcc
– Lead length: 300mm fly lead
– Max panel thickness: 4mm
– Connector: None (bare fly lead)
– Thread diameter: 6.1mm

Note: Can also be connected to a temperature input – leave the 5V wire disconnected.