MaxxECU Race Standard Kit

MaxxECU Race Standard Kit

Full-featured MaxxECU with built-in wideband controller, Bluetooth, knock sensors, and EGT inputs. MaxxECU Race is a good option for 4-8 cylinder builds requiring knock detection and exhaust temperature monitoring.

What’s Included:

1x MaxxECU Race ECU
1x 3m pre-wired loom with extra cable
1x Push-lock vacuum hose and fittings
1x USB cable
1x Bluetooth antenna
1x Pinout sheet

Built-in Features and Physical Specifications:

Built-in wideband controller (LSU 4.2/4.9)
4 bar MAP sensor included
DBW capable
Bluetooth connectivity with MDash Android app support
8MB internal logging at 1000Hz
All EGT inputs sample at 50Hz
Dimensions: 155x195x40mm (including mounting tabs)
Weight: 880g
Case: Aluminum

Outputs:

8x Injector outputs (peak/hold, 8A each) – runs high or low impedance injectors
8x Ignition outputs (5V signal for coils, CDI units, or ignition modules)
9x Low-side outputs for auxiliary functions (fuel pumps, idle valves, boost control, etc)
2x +12V high-side outputs
4x Half bridge outputs (1 or 2 drive-by-wire throttle, GM idle stepper)

Inputs:

4x Temperature sensors
7x Analog inputs (0-5V sensors)
2x Trigger inputs (VR or Hall)
4x Digital inputs (a 5th is shared with a GPO)
2x Knock sensors
8x EGT (thermocouple)
1x Internal wideband
1x CANbus

Suitable For:

4-8 cylinder engines,
sequential or batch injection,
Wasted spark or individual coil ignition,
Drive-by-wire throttle control,
Flex fuel, traction control, launch control, anti-lag.

Software:

Free MTune software (Windows only).
Free MDash app available for Android devices via Google Play Store.
Download software and base maps here.

NZ Wiring Stock:

We keep MaxxECU Race Standard kits in stock in Petone, Wellington.
As the official NZ MaxxECU dealer, we provide full technical support and installation guidance.