Syltech MSCS 5 Bar TMAP Sensor – MAP and Air Temp, 1/8 NPT

The Syltech 5 bar TMAP sensor reads manifold absolute pressure (0-5 bar, about 4 bar boost) and air temperature at the same point, through one 1/8 NPT port. Useful for speed density setups where a separate IAT bung is hard to place.

What’s Included

– Syltech MSCS-4P-A05-N8 combination sensor
– Mating DTM4 plug with gold plated solid terminals
– PVC protection cap over the glass element – remove before fitting
– Installation guide with calibration tables

Sold Separately

– MAP only: Syltech MSPP 5 Bar MAP
– Spare plug: Deutsch DTM4 Plug – Complete Connector Kit

Specifications

– Part number: MSCS-4P-A05-N8
– Thread: 1/8 NPT
– Pressure: 0 to 5 bar absolute, 0.5-4.5 V
– Temperature: -40 to 140 °C, open element
– Temperature element: NTC 2.7 kΩ ±0.75%
– Body: stainless steel
– Connector: Deutsch DTM 4-pin

Pinout

– Pin 1: pressure signal (0-5 V)
– Pin 2: temperature signal
– Pin 3: ground
– Pin 4: 5 V supply

Notes

The temperature element is an open glass bead for fast response. Air only – not suitable for fluids.

Wiring and Setup

Calibration files for Haltech, Link, MoTeC, Emtron and MaxxECU, plus raw calibration tables, are on syltech.com.au. Works with any aftermarket ECU or logger that takes a custom sensor table.

NZ Wiring Stock

– Held in stock at NZ Wiring in Petone.