Syltech MSPP 10 Bar MAP Sensor – 1/8 NPT, DTM3

The Syltech 10 bar MAP sensor measures 0 to 10 bar absolute (145 psi). That is about 9 bar of boost at sea level, for builds past the range of the 7 bar sensor. 304L stainless body and diaphragm, 1/8 NPT thread and a DTM3 plug.

What’s Included

– Syltech MSPP-3P-A10-N8 pressure sensor
– Mating DTM3 plug with gold plated solid terminals
– Installation guide with calibration data

Sold Separately

– Stocked alternative: MSPP-3P-A07-N8 (in stock)

Specifications

– Part number: MSPP-3P-A10-N8
– Thread: 1/8 NPT
– Range: 0 to 10 bar absolute (145 psi)
– Output: 0.5-4.5 V linear, 5 V supply
– Body and diaphragm: 304L stainless steel
– Connector: Deutsch DTM 3-pin

Pinout

– Pin 1: ground
– Pin 2: signal (0.5-4.5 V)
– Pin 3: 5 V supply

Wiring and Setup

Calibration files for Haltech, Link, MoTeC, Emtron and MaxxECU, plus raw calibration tables, are on syltech.com.au. Works with any aftermarket ECU or logger that takes a custom sensor table.

NZ Wiring Stock

– Not currently held on the shelf. Ordered in from Syltech in Australia – allow 7-14 days, contact us for an exact ETA.