Long Threaded Hall Sensor

Long Threaded Hall Effect Speed Sensor

M12x1.0 threaded hall effect speed sensor with 65mm long body and red anodized aluminum housing. Uses Cherry sensor technology. For aftermarket trigger systems and gear tooth sensing applications.

What’s Included:

– 1x M12 Hall Effect Sensor
– 2x M12x1.0 locking nuts

Wiring Information:

– Brown: Supply voltage (5-24VDC)
– Black: Signal output
– Blue: Ground (0V)

Technical Specifications:

– Thread: M12x1.0
– Probe diameter: 12mm
– Probe depth: 65.5mm
– Housing: Red anodised aluminium
– Sensor type: Hall effect (Cherry sensor)
– Target material: Ferrous metal (steel)
– Supply voltage: 5-24VDC
– Max switching speed: 15KHz
– Operating temperature: -40°C to +125°C
– Protection rating: IP67
– Wire length: 1000mm
– Recommended air gap: 0.2-2mm

Installation Notes:

Signal output requires pullup resistor – see datasheet for specifications. Do not use on 5V supply if supply voltage may drop below 5V. Applications include aftermarket trigger systems, gear tooth sensing, speed sensing, and crankshaft position sensing.

Wiring Information:

– Brown: Supply voltage (5-24VDC)
– Black: Signal output
– Blue: Ground (0V)

Mounting information:

Probe Diameter: 12mm
Probe Depth: 65.5mm
Wire Length: 1000mm
Recommended Gap: 0.2-2mm

NZ Wiring Stock:

We keep this hall effect sensor in stock in Petone, Wellington.