Short Threaded Hall Sensor

Short Threaded Hall Effect Speed Sensor

15/32-32 threaded hall effect speed sensor with 25.4mm (1″) long body and anodised aluminium housing. Uses Cherry sensor technology. For aftermarket trigger systems and gear tooth sensing applications.

What’s Included:

– 1x 15/32-32 Hall Effect Sensor
– 2x 15/32-32 locking nuts

Technical Specifications:

– Thread: 15/32-32
– Probe diameter: 15/32″ (approx 11.9mm)
– Probe depth: 25.4mm (1″)
– Housing: Anodised aluminium
– Sensor type: Hall effect (Cherry sensor)
– Target material: Ferrous metal (steel) or magnet
– Supply voltage: 5-24VDC
– Max switching speed: 15KHz
– Operating temperature: -40°C to +105°C
– Protection rating: IP67
– Wire length: 1000mm
– Recommended air gap: 0.2-2mm (approx 1.5mm typical)

Wiring Information:

– Brown: Supply voltage (5-24VDC)
– Black: Signal output
– Blue: Ground (0V)

Installation Notes:

Signal output requires pullup resistor – see datasheet for specifications. Senses from near zero speed up to 15KHz and can pick up from ferrous tooth or magnet. Applications include camshaft and crankshaft speed/position sensing, transmission speed sensing, tachometers, anti-skid/traction control systems, sprocket speed monitoring, stop motion detection, and aftermarket trigger systems.

NZ Wiring Stock:
We keep this hall effect sensor in stock in Petone, Wellington.