Syltech MSPP 3 Bar MAP Sensor – 1/8 NPT, DTM3

The Syltech 3 bar MAP sensor reads manifold absolute pressure from 0 to 3 bar (43.5 psi absolute), which is about 2 bar of boost at sea level. Suits naturally aspirated engines and turbo setups up to about 2 bar boost. 304L stainless body and diaphragm, 1/8 NPT thread and a DTM3 plug.

What’s Included

– Syltech MSPP-3P-A03-N8 pressure sensor
– Mating DTM3 plug with gold plated solid terminals
– Installation guide with calibration data

Sold Separately

– Spare plug: Deutsch DTM3 Plug – Complete Connector Kit
– MAP and air temp in one: Syltech MSCS 5 Bar TMAP

Specifications

– Part number: MSPP-3P-A03-N8
– Thread: 1/8 NPT
– Range: 0 to 3 bar absolute (43.5 psi)
– Output: 0.5-4.5 V linear, 5 V supply
– Accuracy: ±0.5% full scale
– Body and diaphragm: 304L stainless steel
– Connector: Deutsch DTM 3-pin

Pinout

– Pin 1: ground
– Pin 2: signal (0.5-4.5 V)
– Pin 3: 5 V supply

Notes

Also suits crankcase vacuum and pressure. Other MAP ranges: 4 bar, 5 bar, 7 bar.

Wiring and Setup

Calibration files for Haltech, Link, MoTeC, Emtron and MaxxECU, plus raw calibration tables, are on syltech.com.au. Works with any aftermarket ECU or logger that takes a custom sensor table.

NZ Wiring Stock

– Held in stock at NZ Wiring in Petone.